SZodixStudyAcademic Library
ShelvesOpen access
Study · an open academic library·Metadata from OpenAlex (CC0)·Shelves·OpenAlex metadata, de-duplicated
Quality of Analytical Measurements: Univariate Regression
11 references·4 citing·35 second hop
Quality of Analytical Measurements: Univariate Regression (2009)Quality of Analytical Measurements: Univa…The Correlation Coefficient: An Overview (2006)The Correlation Coefficient: …Test for non-linearity concerning linear calibrated chemical measurements (2006)Test for non-linearity concer…On the use of the correlation coefficient r for testing the linearity of calibration functions (2004)On the use of the correlation…Detection and quantification limits: origins and historical overview1Adapted from the Proceedings of the 1996 Joint Statistical Meetings (American Statistical Association, 1997). Original title: “Foundations and future of detection and quantification limits”. Contribution of the National Institute of Standards and Technology; not subject to copyright.1 (1999)Detection and quantification …Guidelines for calibration in analytical chemistry. Part I. Fundamentals and single component calibration (IUPAC Recommendations 1998) (1998)Guidelines for calibration in…Estimation of Performance Characteristics of an Analytical Method Using the Data Set Of The Calibration Experiment (1993)Estimation of Performance Cha…Handbook of Quality Assurance for the Analytical Chemistry Laboratory (1990)Handbook of Quality Assurance…Uses (proper and improper) of correlation coefficients (1988)Uses (proper and improper) of…Measurement Error Models (1988)Measurement Error ModelsRegression techniques for the detection of analytical bias (1987)Regression techniques for the…Detection limits with specified assurance probabilities (1987)Detection limits with specifi…Risk Assessment for Linear Regression Models in Metrology (2024)Risk Assessment for Linear Re…A weighted method for reducing measurement uncertainty below that which results from maximum permissible error (2016)A weighted method for reducin…A new multiresponse optimization approach in combination with a D-Optimal experimental design for the determination of biogenic amines in fish by HPLC-FLD (2016)A new multiresponse optimizat…Interpolation in the standard additions method (2013)Interpolation in the standard…Statistics for analytical chemistry (1987)Statistics for Analytical Chemistry (1993)Statistical Estimation of Linear Calibration Range (1996)ALAMIN: a chemometric program to check analytical method performance and to assess the trueness by standard addition methodology (1997)Study of the GC–MS determination of the palmitic–stearic acid ratio for the characterisation of drying oil in painting: La Encarnación by Alonso Cano as a case study (2011)An Introduction to Error Analysis (1982)Thirteen Ways to Look at the Correlation Coefficient (1988)An introduction to error analysis: the study of uncertainties in physical measurements (1997)A practical guide to analytical method validation, including measurement uncertainty and accuracy profiles (2007)Detecting Emotions through Electrodermal Activity in Learning Contexts: A Systematic Review (2021)Measuring what matters in healthcare: a practical guide to psychometric principles and instrument development (2023)Limit of Detection A Closer Look at the IUPAC Definition (1983)Nomenclature in evaluation of analytical methods including detection and quantification capabilities (IUPAC Recommendations 1995) (1995)Tutorial on evaluation of type I and type II errors in chemical analyses: From the analytical detection to authentication of products and process control (2010)Over a century of detection and quantification capabilities in analytical chemistry – Historical overview and trends (2014)On the Determination of Uncertainty and Limit of Detection in Label-Free Biosensors (2018)Decision and detection limits for calibration curves (1970)Detection: International update, and some emerging di-lemmas involving calibration, the blank, and multiple detection decisions (1997)Limits of detection and decision. Part 3 (2007)Handbook of Chemometrics and Qualimetrics (1998)Notes on the use of Mandel's test to check for nonlinearity in laboratory calibrations (2012)Preparation and Certification of Novel Reference Material for Smoke Density Measurements (2018)A review of interference effects and their correction in chemical analysis with special reference to uncertainty (2004)The International Harmonized Protocol for the Proficiency Testing of Analytical Chemistry Laboratories (2016)Methods for the SI-traceable value assignment of the purity of organic compounds (IUPAC Technical Report) (2023)Further comments on the (miss-)use of r for testing the linearity of calibration functions (2005)Validation and Regulatory Issues for Sample Preparation (2012)Nomenclature in evaluation of analytical methods including detection and quantification capabilities1Adapted from the International Union of Pure and Applied Chemistry (IUPAC) document “Nomenclature in Evaluation of Analytical Methods including Detection and Quantification Capabilities”, which originally appeared in Pure and Applied Chemistry, 67 1699–1723 (1995) © 1995 IUPAC. Republication permission granted by IUPAC.1 (1999)Primary methods for the measurement of amount of substance (2001)Estimating uncertainty in analytical procedures based on chromatographic techniques (2009)Nonlinear errors in variables Estimation of some Engel curves (1995)The Use of Latent Trajectory Models in Psychopathology Research. (2003)Intergenerational Transmission of Depression: Test of an Interpersonal Stress Model in a Community Sample. (2004)First international comparative study of volatile fatty acids in aqueous samples by chromatographic techniques: Evaluating sources of error (2013)Validation and measurement uncertainty of rapid and simultaneous determination of 19 elements in drinking water using ICP-MS (2022)
this work references cited by second hop

References

  • 2006The Correlation Coefficient: An Overview1,520 cited
  • 1998Guidelines for calibration in analytical chemistry. Part I. Fundamentals and single component calibration (IUPAC Recommendations 1998)556 cited
  • 1999Detection and quantification limits: origins and historical overview1Adapted from the Proceedings of the 1996 Joint Statistical Meetings (American Statistical Association, 1997). Original title: “Foundations and future of detection and quantification limits”. Contribution of the National Institute of Standards and Technology; not subject to copyright.1538 cited
  • 1988Measurement Error Models466 cited
  • 1987Detection limits with specified assurance probabilities298 cited
  • 1993Estimation of Performance Characteristics of an Analytical Method Using the Data Set Of The Calibration Experiment261 cited
  • 1987Regression techniques for the detection of analytical bias253 cited
  • 1988Uses (proper and improper) of correlation coefficients89 cited
  • 2004On the use of the correlation coefficient r for testing the linearity of calibration functions56 cited
  • 2006Test for non-linearity concerning linear calibrated chemical measurements53 cited
  • 1990Handbook of Quality Assurance for the Analytical Chemistry Laboratory45 cited

Cited by

  • 2016A new multiresponse optimization approach in combination with a D-Optimal experimental design for the determination of biogenic amines in fish by HPLC-FLD37 cited
  • 2013

Only edges whose both ends are imported exist here. Widen the year window, or show the whole map. Back to the work

Interpolation in the standard additions method
25 cited
  • 2016A weighted method for reducing measurement uncertainty below that which results from maximum permissible error16 cited
  • 2024Risk Assessment for Linear Regression Models in Metrology13 cited