SZodixStudyAcademic Library
ShelvesOpen access
Study · an open academic library·Metadata from OpenAlex (CC0)·Shelves·OpenAlex metadata, de-duplicated
Review of SI traceable force metrology for instrumented indentation and atomic force microscopy
2 references·16 citing·32 second hop
Review of SI traceable force metrology for instrumented indentation and atomic force microscopy (2005)Review of SI traceable force metrology fo…Accurate Measurement of the Planck Constant (1998)Accurate Measurement of the P…A Realization of the SI Watt by the NPL Moving-coil Balance (1990)A Realization of the SI Watt …Current state of the art in small mass and force metrology within the International System of Units (2018)Current state of the art in s…The Differential Method for Force Measurement Based on Electrostatic Force (2017)The Differential Method for F…SI-traceable determination of the spring constant of a soft cantilever using the nanonewton force facility based on electrostatic methods (2016)SI-traceable determination of…Highly sensitive, precise, and traceable measurement of force (2016)Highly sensitive, precise, an…High-precision horizontally directed force measurements for high dead loads based on a differential electromagnetic force compensation system (2016)High-precision horizontally d…The multi-position calibration of the stiffness for atomic-force microscope cantilevers based on vibration (2015)The multi-position calibratio…Measurement of cantilever spring constant using an electrostatic sensing and actuating force measurement system (2014)Measurement of cantilever spr…Improving environmental noise suppression for micronewton force sensing based on electrostatic by injecting air damping (2014)Improving environmental noise…Report on the first international comparison of small force facilities: a pilot study at the micronewton level (2011)Report on the first internati…A force measurement system based on an electrostatic sensing and actuating technique for calibrating force in a micronewton range with a resolution of nanonewton scale (2011)A force measurement system ba…SI traceability: Current status and future trends for forces below 10 microNewtons (2009)SI traceability: Current stat…A new facility to realize a nanonewton force standard based on electrostatic methods (2009)A new facility to realize a n…Current status of the quantum metrology triangle (2008)Current status of the quantum…SI-traceable determination of spring constants of various atomic force microscope cantilevers with a small uncertainty of 1% (2007)SI-traceable determination of…SI-Traceable Spring Constant Calibration of Microfabricated Cantilevers for Small Force Measurement (2006)SI-Traceable Spring Constant …Prototype cantilevers for SI-traceable nanonewton force calibration (2006)Prototype cantilevers for SI-…A new precise determination of Newton's gravitational constant (1995)Accurate analytical measurements in the atomic force microscope: a microfabricated spring constant standard potentially traceable to the SI (2003)Comparing AFM cantilever stiffness measured using the thermal vibration and the improved thermal vibration methods with that of an SI traceable method based on MEMS (2017)Comparison of electrostatic and photon pressure force references at the nanonewton level (2018)An initial measurement of Planck's constant using the NPL Mark II watt balance (2007)Tables of Physical and Chemical Constants (1936)Precision measurement and fundamental constants (1971)The 1986 adjustment of the fundamental physical constants (1987)Towards an electronic kilogram: an improved measurement of the Planck constant and electron mass (2005)CODATA recommended values of the fundamental physical constants: 2006 (2008)Determination of the Avogadro Constant (1974)Determination of the volt with the improved PTB voltage balance (1991)Improved methods and uncertainty analysis in the calibration of the spring constant of an atomic force microscope cantilever using static experimental methods (2009)New Method for High-Accuracy Determination of the Fine-Structure Constant Based on Quantized Hall Resistance (1980)CODATA recommended values of the fundamental physical constants: 1998 (2000)Uncertainty budget for the NIST electron counting capacitance standard, ECCS-1 (2007)Determination of the elementary charge and the quantum metrological triangle experiment (2009)The quantum metrology triangle and the redefinition of the SI ampere and kilogram; analysis of a reduced set of observational equations (2010)CODATA recommended values of the fundamental physical constants: 2010 (2012)Guide to the Expression of Uncertainty in Measurement (1995)Accurate Calibration and Uncertainty Estimation of the Normal Spring Constant of Various AFM Cantilevers (2015)Determination of the Electron's Atomic Mass and the Proton/Electron Mass Ratio via Penning Trap Mass Spectroscopy (1995)CODATA Recommended Values of the Fundamental Physical Constants: 2010 (2012)The NIST microforce realization and measurement project (2003)Facility and methods for the measurement of micro and nano forces in the range below 10−5N with a resolution of 10−12N (development concept) (2007)Development of an Electrostatic Calibration System for a Torsional Micronewton Thrust Stand (2015)Milligram mass metrology using an electrostatic force balance (2016)Realization of the kilogram by the XRCD method (2016)A quantum of action on a scale? Dissemination of the quantum based kilogram (2019)Measurement of Submilligram Masses Using Electrostatic Force (2019)Evaluation of an automated mass comparator performance for mass calibration of sub-milligram weights (2020)Proficiency tests for laboratories: a systematic review (2014)
this work references cited by second hop

References

  • 1990A Realization of the SI Watt by the NPL Moving-coil Balance166 cited
  • 1998Accurate Measurement of the Planck Constant162 cited

Cited by

  • 2008Current status of the quantum metrology triangle79 cited
  • 2006Prototype cantilevers for SI-traceable nanonewton force calibration74 cited
  • 2011Report on the first international comparison of small force facilities: a pilot study at the micronewton level67 cited
  • 2009SI traceability: Current status and future trends for forces below 10 microNewtons55 cited
  • 2007SI-traceable determination of spring constants of various atomic force microscope cantilevers with a small uncertainty of 1%47 cited
  • 2009A new facility to realize a nanonewton force standard based on electrostatic methods45 cited
  • 2011A force measurement system based on an electrostatic sensing and actuating technique for calibrating force in a micronewton range with a resolution of nanonewton scale36 cited
  • 2018Current state of the art in small mass and force metrology within the International System of Units33 cited
  • 2014Improving environmental noise suppression for micronewton force sensing based on electrostatic by injecting air damping27 cited
  • 2015The multi-position calibration of the stiffness for atomic-force microscope cantilevers based on vibration21 cited
  • 2016High-precision horizontally directed force measurements for high dead loads based on a differential electromagnetic force compensation system

Only edges whose both ends are imported exist here. Widen the year window, or show the whole map. Back to the work

21 cited
  • 2016SI-traceable determination of the spring constant of a soft cantilever using the nanonewton force facility based on electrostatic methods19 cited
  • 2017The Differential Method for Force Measurement Based on Electrostatic Force19 cited
  • 2016Highly sensitive, precise, and traceable measurement of force18 cited
  • 2014Measurement of cantilever spring constant using an electrostatic sensing and actuating force measurement system18 cited
  • 2006SI-Traceable Spring Constant Calibration of Microfabricated Cantilevers for Small Force Measurement18 cited