SZodixStudyAcademic Library
ShelvesOpen access
Study · an open academic library·Metadata from OpenAlex (CC0)·Shelves·OpenAlex metadata, de-duplicated
New absolute pressure standard in the range 1 Pa to 7 kPa
0 references·6 citing·18 second hop
New absolute pressure standard in the range 1 Pa to 7 kPa (1999)New absolute pressure standard in the ran…Realisation of an optical pressure standard by a multi-reflection interferometric technique (2023)Realisation of an optical pre…Computation of the effective area and associated uncertainties of non-rotating piston gauges FPG and FRS (2018)Computation of the effective …On the stability of capacitance-diaphragm gauges with ceramic membranes (2011)On the stability of capacitan…Reduction of the uncertainty of the PTB vacuum pressure scale by a new large area non-rotating piston gauge (2009)Reduction of the uncertainty …Final report on the supplementary comparison Euromet.M.P-S2 (bilateral comparison) in the pressure range from 30 Pa to 7000 Pa (2007)Final report on the supplemen…High-accuracy calibration in the vacuum range 0.3 Pa to 4000 Pa using the primary standard of static gas expansion (2002)High-accuracy calibration in …Pressures in the high and medium vacuum range generated by a series expansion standard (1990)Novel Nonrotational Piston Gauge with Weight Balance Mechanism for the Measurement of Small Differential Pressures (1994)Volume ratio determination in static expansion systems by means of a spinning rotor gauge (1999)Realization of ppm level pressure stability for primary thermometry using a primary piston gauge (2020)Zero stability and calibration results for a group of capacitance diaphragm gages (1985)Final report on key comparison CCM.P-K4 of absolute pressure standards from 1 Pa to 1000 Pa (2002)New approach to corrections for thermal transpiration effects in capacitance diaphragm gauges (1999)On use of Bayesian statistics to make theGuide to the Expression of Uncertainty in Measurementconsistent (2003)GUIDE TO THE EXPRESSION OF UNCERTAINTY IN MEASUREMENT (2006)The calibration of vacuum gauges (1977)Ultrasonic manometers for low and medium vacua under development at the National Bureau of Standards (1977)Uncertainty evaluation of the IMGC-CNR static expansion system (2004)NIST Calibration Services for Spinning Rotor Gauge Calibrations (2015)Final report on the key comparison CCM.P-K4.2012 in absolute pressure from 1 Pa to 10 kPa (2016)Primary pressure standard based on piston-cylinder assemblies. Calculation of effective cross sectional area based on rarefied gas dynamics (2016)On long-term stability of an air piston gauge maintained at National Physical Laboratory, India (2020)Performance of a dual Fabry–Perot cavity refractometer (2015)Perspectives for a new realization of the pascal by optical methods (2017)
this work references cited by second hop

References

No references inside the corpus for this window.

Cited by

  • 2002High-accuracy calibration in the vacuum range 0.3 Pa to 4000 Pa using the primary standard of static gas expansion20 cited
  • 2018Computation of the effective area and associated uncertainties of non-rotating piston gauges FPG and FRS16 cited
  • 2011On the stability of capacitance-diaphragm gauges with ceramic membranes15 cited
  • 2009Reduction of the uncertainty of the PTB vacuum pressure scale by a new large area non-rotating piston gauge11 cited
  • 2023Realisation of an optical pressure standard by a multi-reflection interferometric technique9 cited
  • 2007Final report on the supplementary comparison Euromet.M.P-S2 (bilateral comparison) in the pressure range from 30 Pa to 7000 Pa8 cited

Only edges whose both ends are imported exist here. Widen the year window, or show the whole map. Back to the work